It can be uncomfortable and stressful to be in a tough scenario, like when your computer won’t turn on. But before you freak out, it’s important to take a cool approach to the problem and look for ways to fix any problems that might be happening with your laptop. This piece from EveryReview will give you a number of ways to fix the problems that are making your computer unresponsive. By looking at and judging the different situations described in the article and learning the steps to fix the problem, it will help you figure out what’s wrong and hopefully fix it, so your computer can work normally again. Do not let a computer get in the way of the quality of your work; follow the steps in the piece to fix the problem.
Table of Contents
Fixing a PC That Won’t Respond: Steps for Troubleshooting
It can be frustrating when your computer won’t turn on, but don’t worry—there are a number of things you can try to fix the problem. When you have this problem, here are some things to think about:
Check Power Source
First, make sure that your computer is plugged in and that the power switch is turned on. If the system still won’t work, try putting it into a different outlet. Also, if you’re using a power strip, try connecting straight to the wall. If your plug is connected to a light switch, make sure the light switch is turned on.
Check the Monitor Connection
If you hear the computer turning on but see a blank screen, check how your display is connected. Make sure the computer is turned on, plugged in, and powered. Check the cable that connects your PC to your monitor to make sure it’s firmly attached, not broken, and plugged into the right port. If the problems don’t go away, connect your computer to a different display, like a TV or another monitor, since the first monitor may be broken.
Device Disconnection
Take care of the issue of possible interference from devices that are linked. During the startup process, unplug all but the monitor, computer, and mouse. Also, unplug any printers, webcams, or external hard drives that are not necessary.
Auditory Evaluation
Listen for any starting sounds; a single beep usually means everything is working fine. Long tones or series of beeps that sound like Morse code, on the other hand, point to a deeper problem. Read the instructions that came with your PC or go to the manufacturer’s website to figure out what these sounds mean and what’s wrong.
With careful attention to these steps, you should be able to find and possibly fix the problem that is stopping your PC from turning on. These proactive steps give users the power to fix both simple and complicated computer problems that won’t turn on.
Initiate Safe Mode to Diagnose Windows Boot Issues
If your PC powers up but struggles to load Windows, attempting to start it in Safe Mode could offer insights into the underlying problem. Safe Mode loads a minimal set of programs, simplifying the troubleshooting process. To access Safe Mode on Windows 10, navigate through the Windows Recovery Environment by following these precise steps:
- Hold down the power button for 10 seconds to shut down your computer.
- Power it on again, and as Windows attempts to start, press the power button to force a shutdown.
- Turn on your computer once more, repeating steps 2 and 3 until your device enters the Windows Recovery Environment.
- On the “Choose an option” screen, go to Troubleshoot > Advanced options > Startup Settings > Restart.
- After the restart, a list of options will appear. Choose Safe Mode with Networking.
- Once in Windows, uninstall any recently added or updated apps or programs to check if they are causing the issue.
- Restore Your Computer to a Previous State
If your PC experiences issues and you have previously set up restore points, reverting to an earlier system state might resolve the problem. Here’s a step-by-step guide to roll back your computer’s settings through the Windows Recovery Environment:
- Repeat steps 1–6 mentioned above to enter the Windows Recovery Environment.
- On the “Choose an option” screen, proceed to Troubleshoot > Advanced options > System Restore.
- Choose a restore point from a time when your PC was functioning correctly and initiate the restoration process.
FAQs
1. Why won’t my PC turn on but have power?
One reason could be that the power cord is not correctly plugged into the PC or the outlet. Another possibility is that the PC’s power supply has failed. Sometimes, the PC won’t turn on, but it is plugged in because of a virus or malware infection.
2. How do I force my laptop to turn on?
Remove any residual electricity by removing the battery, disconnecting the power adapter, and pressing and holding the power button for 30 seconds. Connect the power adapter again, wait 30 seconds, and then turn on the system. If your laptop starts, turn it off again and reinstall the battery.
3. Why is my PC just a black screen?
The black screen of death is a critical system error that causes your computer screen to display all black. The system error forces your operating system to shut down because it can no longer safely function. The black screen of death can be caused by several factors, including hardware or software issues, or malware.